C. 11/250
Helm Pump/ Hydraulic Transmitter with axial pistons in cast iron body
The hydraulic helm pumps of this series are designed to manoeuvre large quantities of oil.
They are strong and complete of non-return valve, the body has a tank function.
Hydraulic transmitters with this cubic capacity are usually used for emergency manoeuvres on big systems or as main manual manoeuvre on vessels which have the necessity of using a steering wheel.
These transmitters are also used for small/medium vessels which require a manoeuvre with the minimum turns of the wheel.
CHARACTERISTICS
11 Internal pistons
250 cc capacity
Axial pistons system
Complete of integrated non-return valve which blocks reversibility.
Non-return valve and shaft seal easily accessible in case of replacement.
Shaft made of brass.
Body in aluminium.
3/4” threading for fittings 3/4” or 22mm (better with bigger tubing).
We recommend a 1000mm as minimum diameter of the wheel.
ACCESSORIES UPON REQUEST
-installation flange
-column
HELM PUMP WITHOUT FLANGE: DOWNLOAD PDF FILE
HELM PUMP WITH FLANGE: DOWNLOAD PDF FILE
